Integrated and inherently safe design and operation of a mobile power generation: Process intensification through microreactor reformer and HT-PEMFC

In the present study, due to various advantages of process miniaturization, the integrated design and operation of a mobile power generation system consisting of a microreactor reformer and a proton exchange membrane fuel cell (PEMFC) are investigated. The hydrogen fuel is supplied through autothermal steam-reforming of methanol in a microreactor leading to a safer, as well as more efficient, and economical operation. A high-temperature polymer membrane fuel cell with external accessories is applied for power generation. Then, simulation-optimization programming is applied for simultaneously optimizing the process design and operation at the same level. The result shows that the implemented procedure ensures the economic and flexible operation of the process while satisfying the safety constraints. The maximum gross power and net power generation are 109.3 and 91.9, respectively, while the cost of hydrogen production reduces from 13 to 20 $/kg to 7.7 $/kg. The fuel (methanol) consumption can be as low as 0.42 L/kWh.     

Hydrogen production costs of a polymer electrolyte membrane electrolysis powered by a renewable hybrid system

In this work, a novel approach related to the production of hydrogen using a polymer electrolyte membrane electrolysis powered by a renewable hybrid system is proposed. The investigation is carried out by establishing energy balances in the different components constituting the combined renewable system. A mathematical model to predict the production of electricity and hydrogen is proposed. The discrepancies between the numerical results and those from the literature review do not exceed 7%. The results show that the overall efficiency and the capacity factor of the combined renewable system without thermal storage are 20 and 34%, respectively. The levelized cost of hydrogen also is 6.86 US$/kg. The effect of certain physical parameters such as optical efficiency, water electrolysis temperature, unit electrolysis capital cost and solar multiple on the performance of the combined system is investigated. The results show that the performance of hydrogen production is optimal when the solar installation is three times oversized. The results also show that the levelized cost of hydrogen for the optimal sized is 4.07 US$/kg. Finally, the proposed combined system can produce low cost hydrogen and compete with hybrid sulfur thermochemical cycles, conventional photovoltaic installations, concentrated photovoltaic thermal systems and wind farms developed in all regions of the world.     

Investigating the influence mechanism of hydrogen partial pressure on fracture toughness and fatigue life by in-situ hydrogen permeation

In this work, we investigate the influence mechanism of hydrogen partial pressure on fracture toughness and fatigue life of a high strength pipeline steel. Both fracture toughness test and fatigue life test are carried out under different hydrogen partial pressure. The experimental results show that with the increasing of hydrogen partial pressure, fracture toughness and fatigue life decrease and the decrease trends gradually flatten out. Hydrogen has a larger effect on fatigue life than fracture toughness. Only 3% hydrogen gas can cause a 67.7% decrease of fatigue life. The in-situ hydrogen permeation test is performed respectively in 2 MPa, 5 MPa and 8 MPa hydrogen partial pressure. With the increasing of hydrogen partial pressure, the increase trend of hydrogen permeation current gradually tends to be gentle, which indicates that the hydrogen atoms entering into the material gradually become saturated. This result can be used to clarify the influence mechanism of hydrogen partial pressure on fracture toughness and fatigue life.     

牦牛绒过氧化氢/过硫酸铵脱色体系工艺优化及其机制

针对现有商业化牦牛绒脱色过程复杂、脱色时间长等问题,提出新型过氧化氢/过硫酸铵体系牦牛绒脱色工艺。在尽可能提高纤维白度的前提下尽量减少纤维损伤,通过单因素试验确定了脱色时间、过硫酸铵用量和试剂pH值,对脱色工艺进行探讨并与商业化脱色牦牛绒进行比较。结果表明:采用过硫酸铵质量浓度为400 g/L,试剂pH值为9,在室温下脱色为180 min可达到商业脱色牦牛绒的效果,脱色时间节省至原来的1/8;脱色机制分析发现,脱色过程中硫酸根自由基起主要作用,羟基自由基起次要作用。该脱色工艺简单,为牦牛绒高值化利用提供了新的解决方案。     

Research and development on membrane IS process for hydrogen production using solar heat

Thermochemical hydrogen production has attracted considerable interest as a clean energy solution to address the challenges of climate change and environmental sustainability. The thermochemical water-splitting iodine-sulfur (IS) process uses heat from nuclear or solar power and thus is a promising next-generation thermochemical hydrogen production method that is independent of fossil fuels and can provide energy security. This paper presents the current state of research and development (R&D) of the IS process based on membrane techniques using solar energy at a medium temperature of 600 °C. Membrane design strategies have the most potential for making the IS process using solar energy highly efficient and economical and are illustrated here in detail. Three aspects of membrane design proposed herein for the IS process have led to a considerable improvement of the total thermal efficiency of the process: membrane reactors, membranes, and reaction catalysts. Experimental studies in the applications of these membrane design techniques to the Bunsen reaction, sulfuric acid decomposition, and hydrogen iodide decomposition are discussed.     

0Cr17Ni4Cu4Nb传感器断裂原因分析

某力学传感器在出厂检验流程中发生断裂失效,为了确定失效原因,防止此类失效事件再次发生,实验对该传感器的力学性能、金相组织和断口形貌进行了分析,确定了断裂原因。结果表明,传感器的失效模式为氢致延迟开裂,材料中氢含量偏高和开裂位置机加工质量较差是导致传感器发生氢致开裂的主要原因。结合失效原因,提出了改进措施。     

磁场环境下铝电解熔融铝液成分激光诱导击穿光谱原位测量分析

铝电解车间具有高温、强磁、多粉尘等环境特点,当前生产过程中熔融原铝的成分检测主要是人工取样然后离线分析,化验过程及结果具有较大的滞后性,故将激光诱导击穿光谱(LIBS)技术应用于铝电解车间铝液成分原位、实时测量具有重要意义。实验采用Nd:YAG脉冲激光器,多通道光纤光谱仪和电感耦合器件(CCD)探测器组成的激光诱导击穿光谱测量系统对电流为400kA电解槽中熔融铝液的主要成分铁、硅进行了探测,对原铝中部分元素的特征谱线进行了归属分析。考察了激光能量在磁场环境下的衰减变化及谱线梯度变迁规律,结果表明,距离电解槽边缘约2m处激光能量衰减达最大。分析了磁场对测试系统的影响,并建立了定标曲线,铁和硅两种元素按照内标法建立的定标曲线拟合度分别为93.50%和97.10%,采用该模型进行了测试实验,并用国标GB/T 7999—2015中光电直读发射光谱(OES)测试的相关指标验证测试结果的重复性与允许差。实验证明,LIBS技术在电解铝行业在线检测方面具有较好的应用前景,但是测试的稳定性与重复性也是面临的一个重要问题。